Chemical and electroplating materials related categories - Degreasing agent,Electroplating degreasing agent,Hot-dip degreasing agent.

Degreasing agent,Electroplating degreasing agent,Hot-dip degreasing agent.

Model Name.:Degreasing agent,Electroplating degreasing agent,Hot-dip degreasing agent.

  • Model No.:Environmental degreasing agent, Metal degreasing agent, Electroplating degreasing agent, Hot dip degreasing agent, Dip heat degreasing agent, Polishing wax degreasing agent, Ultrasonic degreasing agent,
  • Application: Various metal parts,Non-metallic parts,Electroplating parts, Surface treatment parts,Hot dip degreasing,Ultrasonic degreasing, Remove polishing wax,Cutting oil,dirt,Can quickly degrease.
  • Patent Region:not

Product Feature:

ECO-Friendly/ Alkaline JT-28DG-1 Degreasing Agent 

(Japanese formula, made in Taiwan)

Product Introduction:

1.ECO-friendly formula of surface-active agent (JT28DG-1)produced by our company, after it has mixed to become a degreasing agent, it is compatible with alkaline defeat degrease powder which produced by various manufacturers, operation is convenient and with flexible application.

Product Features:

1.It is suitable for iron, copper, zinc, aluminum, stainless steel metal material in surface processing, to remove the remain of oil stain, polishing wax, wax oil, etc…. with excellent efficiency of degreasing and cleaning  .

2.The degreasing agent containing the ratio of surface-active agent is fewer the cost is cheaper, decontamination effect will be worse, the defat time should be extended, degreasing temperature should be increased.

JT-28DG surfactant to allocate into degreasing agent, used in different metals of degreasing and remove stain the operating conditions are as follows

1.Hot-dip degreasing and remove stain:Temperature of about 65 ~ 80 ℃, time is about 5 to 10 minutes.

2.Ultrasonic Cleaner of degreasing and remove stian:Temperature of about 55 ~ 65 ℃, time is about 2 to 5 minutes.

3.Semi-automatic, fully automatic plating line inside plating tank with rotary barrel plating drum degrease defat to remove grease or applying hexagon or octagon of iron barrel for tumbling , etc...

4.As mentioned above the method of degreasing and remove stain, it depends on the temperature and time.

5.Other brands of surface-active agent is cheaper because of different quality, to allocate into degreasing agent, easy to aging and consumption of fast, degreasing effect of poor, needs to large number of additional, waste water and sewage treatment fees of costs, JT-28DG surface-active agent is worthy of your choice.

Product Description:

1.Hot-dip degreasing agent inside the surfactant content and quality, it is a very important key point of defect-free rate of electroplating, painting, electrophoresis, powder coating. Degreasing agent ineffective or degreasing fluid easy to aging, both can cause the partial matte of plating surface no gloss, rough, peeling, swelling, pin holes and bad dense adhesion, so that your company costs will increase, using our company production of JT-28DG-1 degreasing agent, can complete to solve other brands of degreasing agent due to the ineffective to cause the defect products.

2.Hot-dip degreasing agent contained the quality and proportion of surfactants, is the key point of degreasing and remove stain, the bad qualify of surface-active agent to allocate into a degreasing agent, easy to aging and degreasing ineffective may cause sprayed parts or plating layer or coating layer is bad dense adhesion, separate, becomes convex, pin holes, from swelling, dull, etc…So that your company the costs will be increased..

3.Our company of JT-28DG surface-active agent to allocate into a degreasing agent, can complete to solve other brands of degreasing agent due to the ineffective to cause the defect products.

4.This product applied in Taiwan plating factory for pre-treatment in high quality plating parts and degrease performance is satisfied by electronics components plating industries very much.

5.Your company can be according to the different metal surfaces of the oil defat needs to be changed to do the test, can also send some parts to our Taiwan’s company, we will be according to the parts to allocate the degreasing formula, and then send to your company to allocate by yourself.

Remark:

If you need detailed product catalog, please feel free to sendinquiries to the following email address. (Export@thingwell.net / huang5468@thingwell.net / assistant@thingwell.net)


1F,No.14,Ln.661,Sec.5,Chungsin Rd.,Sanchong Dist.,New Taipei City 241, Taiwan.

TEL:886-2-2995-2954 FAX:886-2-2995-7615